WELLDONE Chemicals

Potable water Grade PAC
+86 17669680656
Form consultation
Product Details

Potable water Grade PAC is white powder polyaluminium chloride, spray drying type, high purity, high bacisity, mainly used for potable water treatment, also used for wastewater treatment, food grade.

TYPICAL PROPERTIES:

Specifications:

Standard

Appearance:

White solid powder

Al2O3       %   :

≥30

Basicity     %:

45-55

Insoluble   % :

≤0.3

SO42-       % :

≤0.5

N          % :

≤0.01

As         % :

≤0.0002

Mn        % :

≤0.0005

Cr6+       % :

≤0.0005

Hg         % :

≤0.00001

Pb         % :

≤0.001

Cd         % :

≤0.0002

Fe         % :

≤0.008

PH(1% water solution):

3.5~5.0

PRODUCT INTRODUCTION:

CHEMICAL NAME:

Potable water Grade PAC Spray drying type Polyaluminium Chloride

DESCRIPTION:

Potable water Grade PAC it is Polyaluminium Chloride, spray drying type, white powder, used for drinking water treatment and paper mills as retention agent, work as coagulant for water treatment.

ADVANTAGES:

  1. Can be used widely for industrial application.

  2. Easily soluble in water; dissolves rapidly.

  3. Cost is very low, very competitive than other general coagulants.

  4. Dosage will be less(20-50%) than drum dried PAC

  5. Floc forming fast, good activity, good filtering.

  6. Don’t need adding alkaline additives, if deliquescence, its effect remain same.

  7. Adapted for a wide pH value, strong adaptability

  8. The Salt content in the effluent will be reduced after use PAC.

  9. Can remove the water pollution of heavy metals and radioactive substances.

  10. The active ingredient of high, convenient storage and transportation.

APPLICATION FIELDS:

  1. Coagulant for different industrial area

  2. Clarifying agent in waste water

  3. Sludge thickening agent

APPLICATION PROCESS:

APPLICATION:

  1. Suggested to dilute to the concentration of 2%-20% solution before use.

  2. For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.

  3. For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different   lab test results.

PACKAGE:

Packed in inner plastics bags(white or yellow) and polypropylene woven bags, with each bag containing 25kgs.

STORAGE:

Should be stored in original containers in cool and dry place.